panasonic dvd rv31 error codes Accomac Virginia

Computer service, repair, upgrading. Network and phone cabling. Computer and printer supplies, large inventory of hp inks kept in stock at low prices. Faxing service and Free WIFI.

Address 36296 Lankford Hwy, Belle Haven, VA 23306
Phone (757) 442-3691
Website Link

panasonic dvd rv31 error codes Accomac, Virginia

No audio/video output¶ Make sure all connectors are clean and are firmly connected to proper port.Internal connection of audio/video outputs are disrupted and no longer connected to main printed circuit board.Logic There are 0 registered and 898 anonymous users currently online. I found that I had to have the unit powered up when I hand-spun the motor, then everything worked perfectly... This errors usually happens because the spindle(The thing that spins the DVD), isn't moving properly.

Shamus May 2009 I had this problem with a SC-VK70D CD/DVD player. If the machine is giving you an H02 error, the Spindle Motor may be malfunctioning.If the disc cannot be read at all, the Optical Sensor Rails may be dirty and the Show all Wiki Recent Changes Community Links Social Groups Go to Page... I'm not good at electronics and I'm not recommending anyone do this.

It also unlocks the error. Answers Who answers the questions? Most of the time the Spindle motor is dieing out when you get a H02 error. The time now is 05:54 PM. -- 3.7 New ---- 3.7 Video Game Talk -- Mobile One Rules - DVD Talk - Archive - Advertising - Cookie Policy -

Does your solution for the error message always work? nothing at all...." -Ned Flanders Check out Castle Larkshire! 09-19-02, 06:12 PM #2 Blade Uber Member Join Date: Mar 1999 Location: Overlooking Pearl Harbor Posts: 16,232 Doesn't sound Thanks for the easy fix!

Sept 2016

Mend it How can I repair my VW Passat? I spinned the lamp stud unit all the way down the bottom of the sharft and kept rotating the wheel for a while.

But if it doesn't spin up, then it might just need a little nudge. View Statistics: Past 24 Hours: 3 Past 7 Days: 34 Past 30 Days: 126 All Time: 13,221 22,285 Free Manuals 87,503 Solutions 6,583 Devices iFixit About Us Customer Support Careers Feedback Panasonic (and most stand alone players) uses custom loader mechanisms that don't really resemble a DVD-ROM drive at all. HO2, HO3, etc.

The spindle driver becomes hot. Thank you for using FixYa. Click here to help Fault info. Feb 10, 2008 | Panasonic DVD-RP56 DVD Player 1 Answer HO2 error That's the spindle motor and it has to be replaced to solve the problem.

The motor spun, and I let it do so for about 30 seconds. Will try that next if needed. H02 appears. It is a progressive dvd player, as opposed to interlacing, meaning that it scans each line of pixels progressively, rather than by scanning the even then odd lines.

Just open the disk tray and gently turn the ratcheted wheel clockwise with your finger. You guys are great!! I guess this might prolong the enevitable new player a few more days anyhow. After the fifth attempt it started up as good as new.

To do this, turn the spindle until the eye touches the center. ack patrick pmm8647 is offline Quote post #5 of 73 Old 02-27-2004, 08:13 AM DrJoe AVS Special Member Join Date: Aug 2000 Location: Franklinton, NC, USA Posts: 2,219 Any advice will be greatly appreciated. Thanks for your suggestions - I'm off to see if it works.

Also a blast from a air can will help get rid of any dust build up. Don't know what it was, but maybe it had something to do with one of the spindle motors being jammed. I'm sitting here and can't 10/23/2016 10/23/2016 Russell H. I purchased a Panasonic LS90 34 days ago and got the H03 message (4 days beyond the return/exchange period, of course!).

the problem arrise from the laser lamb which moves up and down the disk through a mechanical shaft I do believe when we press the back space for long time it Now it plays fine everytime. I followed your tricks and it worked. I hadn't used the camera since 2004!

Lars July 2005 Actually, i'll rephrase that, H02 is intermittent stopping/freezing during play (usually due to a faulty spindle motor). although it still is a longshot __________________ Klipsch RF-3II- Front and Surrounds Klipsch RC-35 Center Energy S10.2 Subwoofer Denon 2802 12-28-03, 08:00 PM #7 reubs82 DVD Talk Gold Edition In addition, I was able to replicate the h05 when I was refocusing my pickup, so I think it might be an out of focus code, but not sure. I opened up my Panasonic DVD player by unscrewing the screws behind it.

I fixed this error by gently shaking the machine. Since I read on either these forums or another place googling H02 took me, that the motor was DC, I decided to press a 9 volt against the solder points. Works like new. It's worth a thousand words.

We use data about you for a number of purposes explained in the links below. nothing at all...." -Ned Flanders Check out Castle Larkshire! 09-20-02, 06:16 AM #5 stevevt DVD Talk Hall of Fame Join Date: Nov 1999 Location: Vermont Posts: 9,729 Quote: Baselworld is only a few weeks away. Additional Information¶ AVS Forum - Information about certain error codes Owners Manual - Original Operating Instructions Panasonic DVD-RV31 Player Review/Overview - A review of the dvd player from when it was

The message "H07" means "Replace Spindle Motor" not sure if this is true or not although it could be. I've had this player several years and did not want to have to replace it. Don't know how long it will last, but works for now. I removed it, cleaned it, still nadda.

It's nice to know how to fix it. The motor spun, and I let it do so for about 30 seconds. But it rarely turns out to be the optics when that error message is shown.